ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fuel Charging and Controls > < Fuel Injectors

Puma 1998 (06.1997-12.2001)

Fuel Charging and Controls - Fuel Pressure Regulator Puma 1998 (06/1997-12/2001)
Removal and Installation

Removal

WARNING:
WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions can result in personal injury.
  1. De-pressurize the fuel system. For additional information, refer to Section  310-00 Fuel System - General Information.

  1. Disconnect the vacuum hose from the fuel pressure regulator.

  1. Remove the fuel pressure regulator.

Installation

WARNING:
WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions can result in personal injury.
  1. Install new O-ring seals.

  1. To install, reverse the removal procedure.

Fuel Charging and Controls > < Fuel Injectors