General Procedures | -
Measure the clutch pedal stroke. - If there is any malfunction, loosen locknut A and adjust the pedal stroke by clutch switch B. Tighten locknut A after adjustment.
- Clutch pedal stroke 152 mm.
| | -
Lightly depress the clutch pedal by hand until clutch resistance is felt and then measure the pedal play. - If it is not within the specification, loosen locknut C and turn push rod D to adjust the pedal play.
- Remeasure the pedal play and, if it is within the specification, tighten locknut C.
- Clutch pedal play 5—15 mm.
- Clutch pedal push rod play (Reference value) 0.1—0.5 mm.
| | |