Removal and Installation Removal | -
Disconnect the negative battery cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | -
Remove the center panel unit. For additional information, refer to: Audio Unit (415-01 Audio Unit, Removal and Installation). | | -
Remove the driver’s side front side trim. For additional information, refer to: Cowl Side Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). | | -
Disconnect the connection between the roof antenna and the audio unit. For additional information, refer to: Audio Unit (415-01 Audio Unit, Removal and Installation). | | -
Remove the screws and pull out the roof antenna. | Installation | -
Tape the antenna jack to the antenna drain hose. | | -
Pass the roof antenna and antenna drain hose through the A-pillar from the hole in the roof. | | -
Install in the driver’s side front side trim. For additional information, refer to: Cowl Side Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). | | -
Install the center panel unit. For additional information, refer to: Audio Unit (415-01 Audio Unit, Removal and Installation). | | -
Connect the negative battery cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | |