ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Reversing Lamp Switch > < Rear Lamp Assembly
Exterior Lighting - Parking Lamp Ranger 2006.5 (05/2006-)
Removal and Installation

Removal

  1. Disconnect the negative battery cable.
    For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

  1. Remove the components in the following order.
    1. Connector.
    1. Socket.
    1. Parking light bulb.

Installation

  1. To install, reverse the removal procedure.

Reversing Lamp Switch > < Rear Lamp Assembly