Removal and Installation Removal | -
Disconnect the negative battery cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | -
Remove the glove compartment. For additional information, refer to: Glove Compartment (501-12 Instrument Panel and Console, Removal and Installation). | | -
Remove the components in the following order. - Nut.
- Keyless control module connector.
- Keyless control module.
| | -
NOTE:The screw which fixes the keyless control module bracket is for a body ground connection. Be sure to secure the screw when installing. Remove the screw. - Slide the bracket in the direction of the arrow and remove it.
| Installation | -
To install, reverse the removal procedure. | | |