Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Radius Arm Bushing: Service and Repair
REMOVAL
1. Loosen the upper shock absorber pivot bolt and compress the front shock absorber.
2. Remove the nut and washer attaching the radius arm to the radius arm bracket. Remove the outer insulator and spacer and shield (if equipped).
3. Move the radius arm and axle assembly forward out of the radius arm bracket.
4. Remove the inner insulator and retainer.
INSTALLATION
For installation follow removal procedures in reverse order. Tighten radius arm to radius arm bracket nut to 113-153 Nm (83-113 ft. lbs.). Tighten
upper shock bolt to 34-46 Nm (25-34 ft. lbs.).