Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
10. CAUTION: Align the slot on the TSS sensor electrical connector with the slot in the (16-pin) case connector.
Install the TSS sensor wire.
1. Install the TSS sensor wire into (16-pin) electrical connector.
2. Install the TSS sensor wire into locator.
11. CAUTION: Do not overstretch the retaining spring.
Install the transmission case (16-pin) electrical connector retaining spring.
12. Install the EBC, CCS, and SSB solenoids,