Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
13. CAUTION: The solenoid clamp must be installed in the TCC and EBC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1. Position the solenoid clamp on the main control valve body.
2. Install the solenoid clamp screws.
14. Connect the TCC, CCS, SSB, and EBC solenoid electrical connectors.
15. CAUTION: Excessive pressure can break the retaining pins.
Install the wire loom guide and protector.
^
Align the retaining pins to the holes in the solenoid clamps and gently press in the wire loom guide and protector.
16. Install the transmission fluid pan filter and a new transmission fluid pan gasket.
17. Lower the vehicle.
18. Connect the battery ground cable.
19. Fill the transmission to the correct fluid level and cheek for correct transmission operation.
^
Use MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON V.
