Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
4. CAUTION: Do not damage the rubber O-rings in the axle shaft grooves.
Install the U-washers.
1. Position the two U-washers on the button end of the axle shafts.
2. Pull the axle shafts outward.
5. NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with threadlock and sealer prior to installation.
Install the differential pinion shaft.
1. Align the hole in the differential pinion shaft with the case lock bolt hole.
2. Install a new differential pinion shaft lock bolt.
6. Install the rear brake drums.
7. Apply a new continuous bead of sealant of the specified thickness to the differential housing cover.
8. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If