Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
possible, allow one hour before filling with lubricant to make sure the silicone sealant has correctly cured.
Install the differential housing cover.
1. Install the different housing cover.
2. Install the 10 differential housing cover bolts.
9. Fill the rear axle housing with 2.4 liters (5 pints) of lubricant.
10. Install the wheels and tires.
11. Lower the vehicle.
8.8 Inch Ring Gear
Axle Shaft
Materials
Removal
1. Raise and support the vehicle.
2. Remove the rear wheel and tire assembly.
3. Remove the brake drum.
4. Remove the differential housing cover and drain the lubricant.
5. Remove the differential pinion shaft.
1. Remove and discard the bolt.
2. Remove the differential pinion shaft.
6. CAUTION: Do not damage the rubber O-ring in the U-washer groove.
Remove the U-washer.
1. Push the axle shaft inboard.
2. Remove the U-washer.