Ranger 4WD L4-2.3L VIN D (2002)
SPECIAL TOOL(S)
REMOVAL
1. Remove the lower rear seat trim panel.
1
Remove the pin-type retainers.
2
Remove the lower rear seat trim panel.
2. Remove the center facing rear safety belt retractor.
1
Use Safety Belt Bolt Bit to remove the bolt.
2
Remove the center facing rear safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
^
Check the restraint system for correct operation.
Retractor - Rear Seat, Four-Door, Supercab