Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
5. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup.
Install the extension housing.
1
Position the extension housing.
2
Install the screws.
3
Install the extension housing stud.
6. If equipped, install the transfer case.
7. NOTE: Align the driveshaft with the marks made during removal to ensure correct balance.
Install the bolts.
8. NOTE: Make sure the tab is in the lock position.
NOTE: Install new O-rings on the transmission case (16 pin) electrical connector.
Install the transmission case (16 pin) electrical connector.
^
Lubricate the transmission case (16 pin) electrical connector O-rings with petroleum jelly.