Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
9. Press the transmission case (16 pin) electrical connector through the case until a click is heard.
10. CAUTION: Align the slot on the TSS sensor electrical connector with the slot in the 16 pin case connector.
Install the TSS sensor wire.
1
Install the TS S sensor wire into (16 pin) electrical connector.
2
Install the TSS sensor wire into locator.
11. CAUTION: Do not overstretch the retaining spring.
Install the transmission case (16 pin) electrical connector retaining spring.
12. Install the EPC, CCS, and SSB solenoids.