Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
13. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1
Position the solenoid clamp on the main control valve body.
2
Install the screws.
14. Connect the TCC, CCS, SSB, and EPC solenoid electrical connectors.
15. CAUTION: Excessive pressure may break the retaining pins.
Install the wire loom guide and protector.
^
Align the retaining pins to the holes in the solenoid clamps and gently press in the wire loom guide and protector.
16. Install the transmission fluid pan filter and a new transmission fluid pan gasket.
17. Lower the vehicle.
18. Connect the battery ground cable.
19. Fill the transmission to the proper fluid level and check for proper transmission operation.
^
Use MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON V.