Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Seals and Gaskets: Service and Repair
Rear
Special Tools
Removal
1. Remove the pinion flange.
2. Pry up on the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer until the rear axle drive pinion seal is
removed.
Installation
1. Lubricate the new rear axle drive pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-MIC75-B.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and install a
new seal.
Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.