Ranger 4WD V6-4.0L (2009)
Assembly
Seats with manual lumbar
1. Install the lumbar support assembly.
1. Attach the lumbar assembly to the guide wires.
2. Install and hook the lumbar adjusting cable.
3. Flex the lumbar support.
4. Hook the lumbar support cable.
5. Install the tie strap.
All seats
2. Install the backrest foam pad to the backrest frame.
3. Position the backrest trim cover to the backrest and install the hog rings.
4. Roll the trim cover down the backrest and fasten the hook-and-loop strips.