Ranger 4WD V6-4.0L (2009)
Drive/Propeller Shaft: Removal and Replacement
Driveshaft - Front, Four Wheel Drive (4WD)
Driveshaft - Front, Four Wheel Drive (4WD)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Index-mark the front driveshaft to maintain driveshaft balance.
3. Remove and discard the 6 CV joint bolts and CV joint retainers.
-
To install, tighten to 30 Nm (22 lb-ft).