ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Stabilizer Bar > < Upper Arm

S-MAX.Galaxy 2006.5 (03.2006-)

Rear Suspension - Front Lower Arm S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

General Equipment
Transmission jack

Removal

  1. Remove the spring.
    Refer to: Spring (204-02 Rear Suspension, Removal and Installation).

  1. Fabricate a spacer.

  1. General Equipment: Transmission jack

  1. Install the spacer. Make sure that the spacer is in a vertical plane and raise the suspension to the design height setting.

Installation
  1. Torque: 130 Nm
  1. Install the spring.
    Refer to: Spring (204-02 Rear Suspension, Removal and Installation).
  1. Check the toe setting and adjust as necessary.
    Refer to: Rear Toe Adjustment (204-00, General Procedures).

Rear Stabilizer Bar > < Upper Arm