ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Halfshaft RH > < Front Drive Halfshafts

S-MAX.Galaxy 2006.5 (03.2006-)

Front Drive Halfshafts - Front Halfshaft LH S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Special Tool(s)
204-226
Remover, Halfshaft

204-226-01
Adapter for 204-266

204-349
Protector Set, Ball Joint Gaiter

204-605
Separator, Lower arm-ball joint

204-607
Remover, Ball joint

204-609
Protection Cap, Ball Joint Gaiter

205-047
Slide Hammer

205-775
Protector Halfshaft Seal

Removal

All vehicles
  1. Remove the left-hand front wheel.
    Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

Vehicles with high intensity discharge headlamps
All vehicles
  1.  
    1. Loosen the nut two turns.

  1. Special Tool(s): 204-607

  1. Special Tool(s): 204-605

  1. Special Tool(s): 204-609

Vehicles with 1.8L or 2.0L engine
Vehicles with 2.5L engine
  1. Special Tool(s): 205-047, 204-226, 204-226-01

Installation

All vehicles
  1. NOTE:
    NOTE:Make sure that a new component is installed.

  1. Special Tool(s): 205-775

  1. Special Tool(s): 204-609

  1. Special Tool(s): 204-605

  1. WARNING:
    WARNING:Make sure that a new bolt is installed.
    Using the halfshaft bolt, connect the halfshaft to the wheel hub.
    Torque: 20 Nm

  1. Special Tool(s): 204-349
    Torque: 100 Nm
Vehicles with high intensity discharge headlamps
  1. Torque: 8 Nm
All vehicles
  1. Torque: 200 Nm

  1. Torque:
    Stage 1:
    45 Nm
    Stage 2:
    80°
  1. Install the left-hand front wheel.
    Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

Front Halfshaft RH > < Front Drive Halfshafts