ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Power Steering Pump - 1.8L Duratorq-TDCi (Lynx) Diesel > < Power Steering Pump - 2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4)

S-MAX.Galaxy 2006.5 (03.2006-)

Power Steering - Power Steering Pump—2.5L Duratec (VI5) S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the following items:
    1. Remove the right-hand headlamp assembly.
      Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).
    1. Remove the accessory drive belt.
      Refer to: Accessory Drive Belt (303-05B Accessory Drive - 2.5L Duratec-ST (VI5), Removal and Installation).
  1. Lower the vehicle.

  1. Position the power steering fluid reservoir to one side.

  1. CAUTION:
    CAUTION:Make sure that all openings are sealed.
    • Torque: 23 Nm
  1. Raise and support the vehicle.
    Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. Position the air conditioning (A/C) compressor to one side.
    Torque: 25 Nm

  1.  
    1. Torque: 25 Nm
    1. Torque: 25 Nm

  1. CAUTION:
    CAUTION:Make sure that all openings are sealed.
    1. Torque: 25 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Fill the power steering system.
    Refer to: Power Steering System Filling (211-00 Steering System - General Information, General Procedures).
  1. Bleed the power steering system.
    Refer to: Power Steering System Bleeding (211-00 Steering System - General Information, General Procedures).

Power Steering Pump - 1.8L Duratorq-TDCi (Lynx) Diesel > < Power Steering Pump - 2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4)