Removal and Installation Special Tool(s) | 211-020 Separator, Ball Joint | Removal NOTE:Removal steps in this procedure may contain installation details. | -
Remove the front wheel and tire. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | | -
WARNING:Make sure a new tie rod end nut is installed. CAUTION:Make sure that the ball joint ball does not rotate. | | -
NOTE:Make sure that the tie rod end is installed with the same number of turns as when removed. | Installation | -
To install, reverse the removal procedure. | | -
Check the toe setting and adjust as necessary. Refer to: Front Toe Adjustment (204-00 Suspension System - General Information, General Procedures). | | |