ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Crankshaft Front Seal > < Valve Clearance Adjustment

S-MAX.Galaxy 2006.5 (03.2006-)

Engine - 2.3L Duratec-HE (MI4) - Intake Manifold S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

General Equipment
Flat-bladed screwdriver
Trolley jack

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. General Equipment: Flat-bladed screwdriver

  1. Refer to: Luftfilter (303-12A Ansaugsystem - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation).
  1. Refer to: Batterie abklemmen (414-01 Batterie, Befestigung und Batteriekabel, General Procedures).
  1. Refer to: Anheben mit Hebebühne (100-02 Fahrzeug anheben, Description and Operation).

  1.  
    1. Torque: 48 Nm
    1. Torque: 80 Nm

  1. Remove the right-hand head lamp unit.
    Refer to: Scheinwerfer (417-01 Außenbeleuchtung, Removal and Installation).

  1. General Equipment: Trolley jack

  1.  
    1. Torque: 90 Nm
    1. Torque: 80 Nm
    1. Torque: 25 Nm
    1. Torque: 90 Nm

  1. Torque: 18 Nm

Installation

  1. To install reverse the removal procedure.
  1. NOTE:
    NOTE:During initialisation the pedals must be in the rest position.
    Turn the ignition key to position II and then wait one minute in order to initialise the throttle valve.
  1. Turn the ignition key to the OFF position.

Crankshaft Front Seal > < Valve Clearance Adjustment