General Procedures Special Tool(s) | 303-195 Compressor, Valve Spring | | 303-196 Pliers, Valve Shim | | -
Remove the valve cover. Refer to: Valve Cover (303-01C Engine - 1.8L Duratorq-TDCi (Kent) Diesel, Removal and Installation). | | -
NOTE:Using a suitable feeler gauge, measure the valave clearance. | | -
NOTE:Rotate the crankshaft by a further 90 degrees. NOTE:The piston of the cylinder to be adjusted must not be at TDC. | | -
To install, reverse the removal procedure. | | |