Removal and Installation Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | -
NOTE:Clean and inspect the gasket. The gasket is to be reused unless damaged. Torque: 10 Nm | | -
Refer to: Fuel Filter (310-01E Fuel Tank and Lines - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). | | -
NOTE:Clean and inspect the gasket. The gasket is to be reused unless damaged. Torque: Stage 1: 5 Nm Stage 2: 9 Nm | Installation | -
To install, reverse the removal procedure. | | |