ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Radiator > < Thermostat - 2.0L Duratec-HE (MI4)

S-MAX.Galaxy 2006.5 (03.2006-)

Engine Cooling - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4) - Coolant Pump S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Refer to: Cooling System Draining, Filling and Bleeding (303-03A Engine Cooling - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), General Procedures).
  1. Remove the right-hand headlamp assembly.
    Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).

  1. Loosen: 3 turn(s)
  1. Refer to: Accessory Drive Belt (303-05A Accessory Drive - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation).

  1.  
    1. NOTE:
      NOTE:Do not fully tighten the bolts at this stage.
    1. Torque: 10 Nm

Installation

  1. To install, reverse the removal procedure.

  1. Torque: 20 Nm

Radiator > < Thermostat - 2.0L Duratec-HE (MI4)