Removal and Installation General Equipment Removal NOTE:Removal steps in this procedure may contain installation details. | -
Drain the cooling system. Refer to: Cooling System Draining, Filling and Bleeding (303-03, General Procedures). | | -
Remove the cooling fan motor and shroud. Refer to: Cooling Fan Motor and Shroud (303-03, Removal and Installation). | | -
Remove the charge air cooler (if equipped). Refer to: Charge Air Cooler (303-12, Removal and Installation). Refer to: Charge Air Cooler (303-12 Intake Air Distribution and Filtering - 2.0L Duratorq-TDCi (DW) Diesel, Removal and Installation). | | -
Secure the air conditioning (A/C) condenser to the front panel. | | -
NOTE:This step requires the aid of another technician. NOTE:Radiator insulators are to be reused unless damaged. Remove the cable ties. | Installation | -
NOTE:Make sure that no components catch when installing the radiator. To install, reverse the removal procedure. | | |