| Removal and Installation Removal NOTE:Removal steps in this procedure may contain installation details. | | -
Refer to: Engine Cooling System Health and Safety Precautions (100-00 General Information, Description and Operation). | | | -
WARNING:When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth. Loosen: 1 turn(s) -
Close the coolant expansion tank cap. | Vehicles built up to 11/2007 | | -
WARNING:Be prepared to collect escaping fluid. Torque: 12 Nm | Vehicles built 11/2007 onwards | | -
WARNING:Be prepared to collect escaping fluid. NOTE:The O-ring seal is to be reused unless damaged. | Installation | | -
To install, reverse the removal procedure. -
Refer to: Cooling System Draining, Filling and Bleeding (303-03A Engine Cooling - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), General Procedures). | |
/Description and Operation/Removal and Installation//img/E86476.jpg)
/Description and Operation/Removal and Installation//img/E68577.jpg)
/Description and Operation/Removal and Installation//img/E99328.jpg)
/Description and Operation/Removal and Installation//img/E99354.jpg)