NOTE:Removal steps in this procedure may contain installation details.
Remove the catalytic converter.
Refer to: Catalytic Converter (309-00C, Removal and Installation).
NOTE:Note the position of the component before removal.
Discard the nut.
Torque: 18 Nm
Torque: 23 Nm
Torque: 20 Nm
Installation
CAUTION:A new component may be supplied with a longer cable than the one removed. Make sure that the cable cannot be damaged or cause a noise, vibration or harshness (NVH) concern.
NOTE:Make sure that the sensor is installed in the same location as when removed.