ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Gearshift Lever > < External Controls
Manual Transmission/Transaxle External Controls - Vehicles With: 6-Speed Manual Transmission (MMT6) - Gearshift Cables S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

General Equipment
Knife

Removal

CAUTION:
CAUTION:The gearshift cables must not be kinked or twisted.
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Refer to: Air Cleaner (303-12C Intake Air Distribution and Filtering - 1.8L Duratorq-TDCi (Lynx) Diesel, Removal and Installation).

  1. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. Lower Vehicle
Vehicles with electronic parking brake (EPB)
  1. Refer to: Floor Console - VIN Plate Body Style Code: M, Vehicles With: Electronic Parking Brake (501-12 Instrument Panel and Console, Removal and Installation).
    Refer to: Floor Console - VIN Plate Body Style Code: S, Vehicles With: Electronic Parking Brake (501-12 Instrument Panel and Console, Removal and Installation).
Vehicles with manual parking brake
  1. Refer to: Floor Console Upper Section - Vehicles With: Manually Adjusted Parking Brake/Center Armrest (501-12 Instrument Panel and Console, Removal and Installation).
    Refer to: Floor Console Upper Section - Vehicles With: Manually Adjusted Parking Brake, Vehicles Without: Center Armrest (501-12 Instrument Panel and Console, Removal and Installation).
All vehicles

  1. Torque: 9 Nm

  1.  
    1. Loosen: 4 turn(s)

  1.  
    1. Torque: 25 Nm
    1. Torque: 9 Nm

  1. General Equipment: Knife

  1. Torque: 9 Nm

Installation

  1. To install, reverse the removal procedure.

  1.  
    1. Torque: 25 Nm
    1. Torque: 9 Nm
  1. Refer to: Gearshift Cable Adjustment - Vehicles With: 6-Speed Manual Transmission (MMT6) (308-00 Manual Transmission/Transaxle and Clutch - General Information, General Procedures).

Gearshift Lever > < External Controls