| General Procedures Special Tool(s) | | 310-025-19A Test Hose for 310-025 | | | 310-042 Connector for 310-025 | | | 310-110A Hand Pressure Pump with Adapter Kit | | | -
Refer to: Diesel Fuel System Health and Safety Precautions (100-00, Description and Operation). | | | -
Operate the hand pressure pump special tool adapter until fuel is visible in the clear plastic tube. | | | -
CAUTION:The starter motor operation must not exceed 10 seconds at a time. After 10 seconds turn the ignition switch to position 0 and allow the starter motor to cool for 30 seconds before operating the starter motor again. Start the engine and allow it to idle until it reaches normal operating temperature. | | |
