General Procedures Special Tool(s) | 501-027 Aligner, Wiper Arm | | 501-027-01 Adapter for 501-027 | | -
CAUTION:Make sure that the wiper motor is in the park position. | | -
NOTE:Make sure that the 3 marked points of the special tool are in contact with the glass. NOTE:The angle of the wiper on the scale must point from the zero center line to the center of the windshield/rear window. Ignore the sign (+/-) on the alignment tool. Using the special tool, read off the angle between the wiper arm and the glass. | | -
CAUTION:Make sure that the special tool is lifted off the glass during the adjustment. Adjust the wiper arm. Refer to: Specifications (501-16 Wipers and Washers, Specifications). | | |