ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Side Air Curtain Module - VIN Plate Body Style Code: S > < Driver Lower Air Bag Module
Supplemental Restraint System - Passenger Air Bag Module S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Removal

WARNING:
WARNING:The supplemental restraint system (SRS) is active for a certain length of time after the power supply has been disconnected. Wait for a minimum of 3 minutes before disconnecting or removing any SRS components.
WARNING:
WARNING:Make sure that the vehicle electrical system is fully depowered and no other power source is connected.
WARNING:
WARNING:Wear safety goggles.
WARNING:
WARNING:Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions (100-00 General Information, Description and Operation).
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.
    Refer to: Battery Disconnect (414-01 Battery, Mounting and Cables, General Procedures).
  1. Remove the navigation system digital versatile disc (DVD) unit, if equipped.
    Refer to: Navigation System Digital Versatile Disc (DVD) Unit (415-01 Information and Entertainment System, Removal and Installation).

Vehicles with air conditioning

All vehicles

  1.  
    1. Torque: 8 Nm
    1. Torque: 8 Nm
    1. Torque: 10 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Initialize the door window motors.
    Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Side Air Curtain Module - VIN Plate Body Style Code: S > < Driver Lower Air Bag Module