ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Subframe Rear Bushing > < Front Subframe Rear Bushing

S-MAX.Galaxy 2006.5 (03.2006-)

Uni-Body, Subframe and Mounting System - Rear Subframe Front Bushing S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Special Tool(s)
204-598
Hydraulic Cylinder 10t

204-598-01
Remover/Installer, Subframe Bushing Guide

205-316A
Alignment Pins, Subframe
General Equipment
Transmission jack

Removal
  1. Fabricate two spacers.
  1. Remove the spring, on both sides.
    Refer to: Spring (204-02, Removal and Installation).

  1. Install the bolt, on both sides.

  1. General Equipment: Transmission jack

  1. Install the Special Tool(s): 204-598-01, 204-598

Installation
  1. Install the Special Tool(s): 204-598, 204-598-01

  1. Install the Special Tool(s): 205-316A

  1. General Equipment: Transmission jack
    Torque: 110 Nm
  1. Remove the Special Tool(s): 205-316A

  1. On both sides.

  1. Torque: 130 Nm

  1. Remove the bolt, on both sides.
  1. Install the spring, on both sides.
    Refer to: Spring (204-02, Removal and Installation).
  1. Refer to: Rear Toe Adjustment (204-00, General Procedures).

Rear Subframe Rear Bushing > < Front Subframe Rear Bushing