Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Starter Motor (V6 24V Variants) - Remove and Install (26 204 0) >
< Starter Motor (DOHC Variants) - Remove and Install (26 204 0)
Scorpio 1995 (10.1994-06.1998)
Mechanical Repairs
3 Powertrain
326 Starting System / 326-01 Starting System
Description and Operation
Removal and Installation
Starter Motor (2,5l TDI Diesel) - Remove and Install (26 204 0)
Starter Motor (2,5l TDI Diesel) - Remove and Install (26 204 0)
Scorpio 1995 (10/1994-06/1998)
Print
Removal and Installation
Special Tools
21-140Engine Support Bar
Remove
1. Disconnect the battery earth lead.
2. Attach the engine support bar service tool No. 21-140.
3. Raise the vehicle and remove the under shield.
4. Remove the lower intercooler hose.
5. Remove the starter motor support bracket fixings.
6. Remove the support bracket and heat shield.
7. Remove the engine mount and insulator assembly.
8. Disconnect the starter motor electric cables.
1. Undo the retaining nuts.
2. Disconnect the multiplug.
9. Remove the starter motor.
1. Remove the bottom bolt.
2. Remove the top bolt.
Install
10. Refit the components in reverse order.
11. Refit the undershield and lower the vehicle.
12. Remove the engine support bar.
13. Reconnect the battery earth lead.
Mechanical Repairs
3 Powertrain
326 Starting System / 326-01 Starting System
Description and Operation
Removal and Installation
Starter Motor (2,5l TDI Diesel) - Remove and Install (26 204 0)
Starter Motor (V6 24V Variants) - Remove and Install (26 204 0) >
< Starter Motor (DOHC Variants) - Remove and Install (26 204 0)