ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Sensor - Heated Oxygen (Post ‐ Catalyst) (DOHC Variants) - Remove and Install (29 220 0) > < Module - Powertrain Control (Petrol Variants) - Remove and Install (29 200 0)

Scorpio 1995 (10.1994-06.1998)

Module - Powertrain Control (Diesel Variants) - Remove and Install (29 200 0)Scorpio 1995 (10/1994-06/1998)
Print Print
Removal and Installation
Remove
1. Disconnect the battery earth lead.

2. Remove the trim panel fasteners.

3. Lower the trim panel.

4. Release the PCM retaining clip.

5. Remove the PCM from the bracket.

CAUTION:

Do not pull on the wiring; pull on the multiplug body.
6. Unscrew the retaining bolt and disconnect the PCM multiplug.
7. Remove the PCM.
Install

CAUTION:

Ensure the PCM multiplug is refitted correctly to avoid damage to the module pins.
8. Refit the components in reverse order.

Sensor - Heated Oxygen (Post ‐ Catalyst) (DOHC Variants) - Remove and Install (29 220 0) > < Module - Powertrain Control (Petrol Variants) - Remove and Install (29 200 0)