ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Actuator - Variable Inlet System (2.0 DOHC) - Remove and Install (23 400 0) > < Sensor - Engine Coolant Temperature - Remove and Install (21 190 0)

Scorpio 1995 (10.1994-06.1998)

Sensor - Intake Air Temperature (2.3 DOHC) - Remove And Install (29 622 0)Scorpio 1995 (10/1994-06/1998)
Print Print
Removal and Installation
Remove

CAUTION:

Disconnect the battery negative lead.

CAUTION:

When disconnecting the multiplugs contained in this operation, do not pull on the wiring; pull on the multiplug body.

1. Disconnect the IAT sensor multiplug.
   Depress the retainer and disconnect the multiplug.

2. Remove the IAT sensor.
   Pull the multiplug from the intake hose.
Install
3. Refit the components in reverse order.

Actuator - Variable Inlet System (2.0 DOHC) - Remove and Install (23 400 0) > < Sensor - Engine Coolant Temperature - Remove and Install (21 190 0)