Taurus V6-182 3.0L DOHC SHO (1992)
4.
Install the new service assembly (large port sensor, bracket, and hose). Attach the bracket with the the existing bolt in the same location as the old
PFE sensor assembly on the intake manifold. Torque bolt to 8-11 N.m (6-8 lb-ft) (Figure 1).
5.
Install the PFE sensor hose to the Exhaust Gas Recirculation (EGR) tube with the clamp provided.
6.
Clear DTC from Continuous Memory.
7.
Re-run Self Test and verify that pass codes are received in KOEO, KOER and continuous.
Obtain an Authorized Modification Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.
PART NUMBER
PART NAME
F3DZ-9J433-A
PFE Sensor Assembly
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage And Emissions Warranty Coverage
OPERATION
DESCRIPTION
TIME
980107A
Replace PFE Sensor Assembly
0.3 Hr.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
9J433
97
OASIS CODES: 204100, 206000, 698298