Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
7. Remove residue from the rear brake pin retainer threads and apply one drop of Threadlock and Sealer to threads. Install and tighten rear brake pin
retainers to 31-35 Nm (23-25 ft. lbs.).
CAUTION: Failure to tighten lug nuts in a star pattern may result in high rotor runout, which will speed up the development of brake roughness,
shudder and vibration.
8. Install wheel and tire assembly on vehicle. Tighten lug nuts to 115-142 Nm (85-104 ft. lbs.) using Accutorq(r) Lug Nut Socket or equivalent, on a
1/2 inch air impact wrench or use a torque wrench.
9. Lower vehicle.
10. Pump the service brake pedal to obtain a firm brake pedal before moving the vehicle.