Taurus V6-195 3.2L DOHC SHO (1994)
INSTALLATION
1. Install fuel injection supply manifolds, ensure all fuel injectors are properly seated.
WARNING: Always use new gaskets when assembling fuel injection supply manifold components to avoid combustion from fuel leakage.
2. Install four fuel injection supply manifold retaining bolts. Tighten to 15-23 Nm (11-17 lb ft).
3. Connect fuel charging wiring at fuel injectors.
4. Connect fuel line spring lock couplers.
5. Install intake manifold.
6. Connect vacuum lines and remaining fuel charging wiring connectors.
7. Run engine and check for fuel leaks.