Taurus V6-195 3.2L DOHC SHO (1994)
![background image](/ford/taurus/v6-195_3.2l_dohc_sho/Page-1348001.png)
Fuel Pressure Regulator: Service and Repair
REMOVAL
1. If removing fuel pressure regulator with fuel injection supply manifold installed in vehicle.
2. Disconnect vacuum line at fuel pressure regulator.
3. Remove fuel pressure regulator from fuel return line and fuel injection supply manifold and discard gaskets.
INSTALLATION
1. Install fuel pressure into fuel return line and fuel injection supply manifold using new sealing gasket.Tighten fuel pressure regulator to 25-40 Nm
(18-25 lb ft).
2. Connect vacuum hose of fuel pressure regulator.
3. Run engine and check for leaks.