ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 1579 > < Procedures|Page 1577
Page 16
background image

79. Disconnect the PSP switch electrical connector.

80. Remove the PSP tube bracket-to-power steering pump bolt.

81. Remove the nut and the PSP tube bracket from the RH valve cover stud bolt.

82. Remove the 3 bolts and position aside the power steering pump.

83. Remove the 3 bolts and the accessory drive belt tensioner.

84. Loosen the 11 stud bolts and remove the LH valve cover.

-

Discard the gasket.

Procedures|Page 1579 > < Procedures|Page 1577