Taurus AWD V6-3.5L (2009)
85. Loosen the bolt, the 10 stud bolts and remove the RH valve cover.
-
Discard the gasket.
86. NOTE: VCT solenoid seal removal shown, spark plug tube seal removal similar.
Inspect the VCT solenoid seals and the spark plug tube seals. Install new seals if damaged.
-
Using the VCT Spark Plug Tube Seal Remover and Handle, remove the seal(s).
87. Using the Strap Wrench, remove the crankshaft bolt and washer.
-
Discard the bolt.
88. Using the 3-Jaw Puller, remove the crankshaft pulley.
89. Using the Oil Seal Remover, remove and discard the crankshaft front seal.