Taurus AWD V6-3.5L (2009)
90. Remove the 2 bolts and the engine mount bracket.
91. NOTE: Only use hand tools to remove the studs.
Remove the 2 engine mount studs.
92. Remove the 3 bolts and the engine mount bracket.
93. Remove the 22 engine front cover bolts.
94. Install 6 of the engine front cover bolts (finger tight) into the 6 threaded holes in the engine front cover.
-
Tighten the bolts one turn at a time in a crisscross pattern until the engine front cover-to-cylinder block seal is released.
-
Remove the engine front cover.