Taurus AWD V6-3.5L (2009)
Yes
INSTALL the removed fuse. Go To Pinpoint Test H. See: Pinpoint Test H: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool
No
INSTALL the removed fuse. GO to T6.
-------------------------------------------------
T6 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE HVAC MODULE DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
-
Disconnect: SJB Fuses 15 (10A) and 37 (10A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuses. Go To Pinpoint Test N. See: Pinpoint Test N: The HVAC Module Does Not Respond To The Scan Tool
No
INSTALL the removed fuses. GO to T7.
-------------------------------------------------
T7 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE AUDIO CONTROL MODULE (ACM) DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
-
Disconnect: SJB Fuse 39 (20A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuse. Go To Pinpoint Test I. See: Pinpoint Test I: The Audio Control Module (ACM) Does Not Respond To The Scan Tool
No
INSTALL the removed fuse. GO to T8.
-------------------------------------------------
T8 VERIFY VEHICLE EQUIPMENT - DSM
-
Inspect the vehicle for a DSM.
-
Is the vehicle equipped with a DSM?
Yes
GO to T9.
No
GO to T10.
-------------------------------------------------
T9 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE DRIVER SEAT MODULE (DSM) DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
