Taurus X FWD V6-3.5L (2008)
Front Door Panel: Service and Repair
DOOR TRIM PANEL - FRONT
Removal and Installation
1. Remove the sail panel.
-
If equipped, disconnect the electrical connector.
2. Remove the front door handle bezel screw cover.
3. Remove the front door handle bezel screw.
4. Remove the front door handle bezel.
5. Remove the 2 front door handle trim cover screws.
6. Remove the 5 front door trim panel screws.
7. CAUTION: Avoid pulling directly on the upper rear corner (vinyl portion) of the door trim panel during removal to prevent damage to
the door trim panel.