Taurus X FWD V6-3.5L (2008)
pawl and the abutment, transaxle removal and disassembly is required to reinstall the actuator rod.
26. CAUTION: Make sure that the park pawl actuator rod does not become disengaged from the park pawl and the abutment or transaxle
removal and disassembly is required to reinstall the actuator rod.
Remove the TR sensor.
1
Slide the TR sensor down until the manual shaft is out of the transaxle case.
2
Rotate the TR sensor detent plate counterclockwise, as viewed from below until the plate rests against the transaxle case, remove the park pawl
actuating rod from the TR sensor and remove the TR sensor.
27. Using a suitable tool, remove the manual lever shaft seal.
