ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Seat - Insufficient Height|Page 5065 > < Front Seat - Insufficient Height
Page 2
background image

Figure 2

Insufficient seat height for short statured persons can be rectified by installing spacers between the front seat track and front seat cushions at the front
seat mounting attachments (Figure 2).
DRIVER'S SEAT TOO LOW FOR SHORT STATURED PERSONS Tempo/Topaz - All Models - 1984

1.

Obtain the following parts:

N801357-S2 Screw M8x1.25x35.5 Hex Washer Head (4 Required) 382629-S100 - Washer 7/16 Flat (8 Required)

2.

Remove the seat and track assembly from the vehicle. Refer to the appropriate removal procedure contained in Section 41 of the appropriate Car
Shop Manual.

3.

Remove and discard the four (4) bolts used to retain the seat tracks to the seat cushion.

Front Seat - Insufficient Height|Page 5065 > < Front Seat - Insufficient Height