ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Steering Gear:|87411 > < Campaign - Steering Gear Inspection/Replacement|Page 3365
Page 6
background image

^

the program coverage and guidelines have been reviewed and understood by the customer.

^

the customer understands how to interpret the symptoms associated with an input shaft seal leak.

^

the customer is unwilling to accept the dealers confirming position that gear replacement is not required at this time.

^

the customer understands the inspection will be performed at no charge and that the inspection is being performed on a one-time only goodwill basis.

Inspection Procedure

^

With car on ground open door and cover seat.

^

remove steering column tube boot.

^

inspect for input shaft seal leakage.

^

install steering column tube boot.

^

remove seat cover.

Claiming Procedure

NOTE:  

Ensure the conditions outlined above in "Administration of one-time inspection allowance" have been compiled with.

 
^

Claims for this Goodwill One-Time Inspection are to be submitted on a 6125-2 through DWE. Dealers without DWE must MAIL the claim into
Warranty Claims Processing at Oakville.

^

Claims MUST be dated and signed by both the Customer and Dealer Service Manager.

Claims MUST include the following:

Causal Part NO.

3D526

Condition Code.

775

Labor allowance.

0.4 Hours.

 
We feel this action will assist dealers in our mutual desire to support customer satisfaction.

All Other Service Bulletins for Steering Gear:|87411 > < Campaign - Steering Gear Inspection/Replacement|Page 3365