ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Customer Interest: > < Campaign - Steering Gear Inspection/Replacement|Page 3273
Page 6
background image

^

the program coverage and guidelines have been reviewed and understood by the customer.

^

the customer understands how to interpret the symptoms associated with an input shaft seal leak.

^

the customer is unwilling to accept the dealers confirming position that gear replacement is not required at this time.

^

the customer understands the inspection will be performed at no charge and that the inspection is being performed on a one-time only goodwill basis.

Inspection Procedure

^

With car on ground open door and cover seat.

^

remove steering column tube boot.

^

inspect for input shaft seal leakage.

^

install steering column tube boot.

^

remove seat cover.

Claiming Procedure

NOTE:  

Ensure the conditions outlined above in "Administration of one-time inspection allowance" have been compiled with.

 
^

Claims for this Goodwill One-Time Inspection are to be submitted on a 6125-2 through DWE. Dealers without DWE must MAIL the claim into
Warranty Claims Processing at Oakville.

^

Claims MUST be dated and signed by both the Customer and Dealer Service Manager.

Claims MUST include the following:

Causal Part NO.

3D526

Condition Code.

775

Labor allowance.

0.4 Hours.

 
We feel this action will assist dealers in our mutual desire to support customer satisfaction.

Customer Interest: > < Campaign - Steering Gear Inspection/Replacement|Page 3273