Tempo L4-140 2.3L HSC (1986)
Rotunda Engine Support Bar
Attach Engine Lifting Bracket (D81L-6001-D) or equivalent to points shown in Figure 1 with bolt (M10x1.5x2O).
6.
Remove belt tensioner.
7.
Remove engine mount.
8.
Remove idler pulley.
9.
Remove idler pulley bracket.
10.
Raise vehicle.
11.
Remove retaining bolts to stabilizer bar bracket.
12.
Lower vehicle.
13.
Lower engine assembly.
14.
Raise the vehicle to a height where damper can be removed easily.
15.
Remove damper bolt.
16.
Remove damper. (If necessary, use Puller-Differential Side Bearing Tool # T77F-4220-B1).
Front Damper - Installation
1.
Install damper.
2.
Install damper bolt.
3.
Lower vehicle.
4.
Raise engine assembly.
5.
Raise vehicle.
6.
Install retaining bolts to stabilizer bar brackets.
